Відео

Can you ride it?

How do i find these places?

how s your donkey holdin up? rackin up 40'000km annually here, 40k in, gonna hit 60k this year, so far all good!

It´s a mess of Himalayan... :D but if you are fine with that, fine for me. It would gain a lot if all this mods would be cleaner.

Looked like great fun splashy splashy 😅 Question: were you running an open intake plate or the original ‘snorkel’ one? Drain hose looks worthwhile mod 🤔👍

HOW! can You be sure that the spacer is placed correctly once you add it like a spices ??? :P

Is there any details of how to fit a grease nipple to headstock? Sounds like a sensible modification.

nice work - I agree - these electrical bits need some loving to keep them reliable

Welding an extra piece on to the Lextek baffle is a great idea, I might do the same to mine. Interested to know how the sound changed. From your comments, it seems it's certainly worthwhile doing. I would also prefer mineto be quieter, but still have that nice deeper sound. plus, as you say, the massive weight saving. Cheers for the video...Jon👍

It was a great day's riding. Ade is a little tinker 😂😂

Top rideout, great watching! This right here is why I bought the himmy … what do you reckon to the new 450 ?

Nice explanation. Got the same job coming up for a Versys x-300. Don't think there's too much difference in the forks except on this versys I aim to take out some of the preload.

I turned up at my local Royal Enfield dealer the day before yesterday and he said "you're brave" cos it was a bit damp and quite cold (for round here) and the place was deserted. It's nice to see other people out and about on two wheels out of season 👍. I was thinking of changing out my two for a couple of TKCs but, after watching this, now I'm not so sure 🤣😂😆... (agree with you about the Mitas E-09's 👍). Thoroughly enjoyed your mud bath expedition! Happy New Year to you too, only 12 months late 🤣😂🤣😂 🥳

At 28:40 : "Oh fuckin 'ell.. hello!" Classic 😆🤣 Thoroughly enjoyed your video and wish I'd been there too; 🤙👍

Just got a 2021 Himalayan myself so will be giving this one a go when I get some time. Based near Halifax (Cleckheaton) so couple of hours away but looks worth the trip out. Great videos and very informative 👍👍

Good post.

nice lane -

bloody ell, nice improvements - still got it?

Were you not supposed to use stiffer springs too? Once you drill the extra holes the stock springs are likely to become too soft.

Is that in Cumbria?

improving like a good red wine! Did you put the stock rear wheel back in?

Interesting :) will got mine in a month. Can you add a post or a video where you put a link to your different mods? Like accessory bat behind the wind shield, USB charger, front suspension,... Thank you and enjoy the rides :)

OK mine has done 22thou,, and was really runnnin ok until the last storm last week. My rear brake master did the same thing (replacment £8,50) I,m runnin Kenda tyres (ok for the price) The bike been runnin sht this last week... so today I charged up the battery,,it was low ,then noticed the terminals lose.. so took out the battery to find one broken termnial,,no sweat I needed another battery anyway( but the really shit thing is I have a spare Lithium battery but its too tall ) I going to take to the dealler and get it serviced plus new chain and sprocs and battery. I swore I was not going to get a new 450,,bbbbbbbbbbbbbbbbbut now I,v seen it ,,I quite like the look,,,but will be keeping my old girl until about 40thou regards

I've crossed the River Dove at that ford. It gets deep(above spark plug level) and quite rocky on the far side. Go in a wide arc. The guy in the house is a top bloke,very helpful if needed

Excellent helpful video - time for me to get drilling! Thank you

Very down to earth..pun intended. Better contact with the early 😊. I have a sprint 955 and wanting to do the same. Thanks I learnt something watching this.. the Rod holder m8 shaft. Not sure what to use for the 5mm ends but I'll find something. Good info about the 8mm holes. I agree about making the emulators adjustable but you'd have to perhaps cut a lug and groove into the spacer and emulator 😮 to stop it turning as the detents would cause bit to rotate instead of adjust. Given these bikes take pillion and or luggage, the load on the suspension can change markedly and I'm not sure preload is the only adjustment you'd then need to make.. Anyway I learned a few good tricks. Thanks. Subscribed

I hate ruts!!!! hey whaats that sat nav?

aye - dunnit, the ruts at the end are nasty

Nice gnarly trail and proper Yorkshire commentary! 👍

Great vid

dont even think this a great road, its actually shite dont believe the hype

Great video. Do you have the gpx file for the route. Cheers

Hi Dean, Great to meet you and do this ride with you. Simon

Very nice but… do you still have the himmy?

Riden it many times and driven it in a car 3 times, once with snow on the top. Always spectacular. Nice camera work, captures the experience properly

Great ride. I did it in reverse up to Torridon when I was staying with Mike H at Tyndrum, long day.

Hi Deano , I’m 6 ‘4’ tall, I intend to fit the same Enduro bars and bar raiders as yourself, do you have to have longer cables? I’ve done the seat modified gear and brake levers to suit my large touring boots 🥾.! John

Good Video.. Rolling on a Meteor 350cc here in Thailand and loving it.. Hope to get a Himmy when funds permit... Holding fire until i get a close up look at the new 450. 🎉

I sold my himilayan a week before abr for a Africa twin but I think I would have had more fun on the Himalayan that day but to be fair I am a big lad so I needed a bigger bike

hi thanks a lot, let me know, i havent understand wich rear whell is it? is it a 4.00 18 from an other bike? or fully handbuild, rim? thanks, julien from france

"Promosm" 👀

Where do you buy the preload spacers for the front shocks?

Enjoyed that ... Looks like the tricky sections were made more difficult by congestion and being unable to get some speed up. 👍

awesome bike good job! was wanting to try that snorkel foe myself. i did some searching and cant seem to find the rubber gasket you used. do you have the size or a link by chance? thanks!

Is there anyway to add the preload cap and the fork extender?

Love the Vid...I have the kit coming. Can someone post the TEC and YSS install directions please?

very well done of yours.. liked it

Hey, can you share the model number or link to the steel bars (I want to mount navigation on those) that you've got behind the windshield? I find it very hard to find one that would be at least acceptable, and yours seems to be just perfect fitted.

Hi. Can you give us some more details for the mods to the baffle ie what length is the extension? number and size of holes if any Etc Etc ideally a picture Keep up the great work cheers

Hi Deano, I've got a 2022 Himi with 4600 kms (about 3000 mls) and the motor has certainly opened up a bit since new but my question is at what mileage do you feel the engine was fully opened up on your bike ?